|
Title |
Date |
|
ISO 22777, ISO22777 |
Footwear. Test method for accessories: touch and close fasteners. Peel strenght before and after repeated closingst method for |
06/01/2005 |
ISO 22803, ISO22803 |
Dentistry. Membrane materials for guided tissue regeneration in oral and maxillofacial surgery. Contents of a technical file |
13/01/2006 |
ISO 228-1, ISO228-1 |
Pipe threads where pressure-tight joints are not made on the threads. Dimensions, tolerances and designation |
26/02/2003 |
ISO 228-2, ISO228-2 |
Pipe threads where pressure-tight joints are not made on the threads. Verification by means of limit gauges |
26/02/2003 |
ISO 22827-1, ISO22827-1 |
Acceptance tests for Nd:YAG laser beam welding machines. Machines with optical fibre delivery. Laser assembly |
01/02/2006 |
ISO 22827-2, ISO22827-2 |
Acceptance tests for Nd:YAG laser beam welding machines. Machines with optical fibre delivery. Moving mechanism |
31/01/2006 |
ISO 2286-1, ISO2286-1 |
Rubber- or plastics-coated fabrics. Determination of roll characteristics. Methods for determination of length, width and net m |
15/08/1998 |
ISO 2286-2, ISO2286-2 |
Rubber- or plastics-coated fabrics. Determination of roll characteristics. Methods for determination of total mass per unit are |
15/08/1998 |
ISO 2286-3, ISO2286-3 |
Rubber- or plastics-coated fabrics. Determination of roll characteristics. Method for determination of thickness |
15/08/1998 |
ISO 22867, ISO22867 |
Forestry machinery. Vibration test code for portable hand-held machines with internal combustion engine. Vibration at the handl |
24/02/2006 |
ISO 22868, ISO22868 |
Forestry machinery. Noise test code for portable hand-held machines with internal combustion engine. Engineering method (grade |
24/05/2005 |
ISO 22870, ISO22870 |
Point-of-care testing (POCT). Requirements for quality and competence |
31/03/2006 |
ISO 2307, ISO2307 |
Fibre ropes. Determination of certain physical and mechanical properties |
24/03/2005 |
ISO 2320, ISO2320 |
Prevailing torque type steel hexagon nuts. Mechanical and performance requirements |
15/05/1998 |
ISO 2338, ISO2338 |
Parallel pins of unhardened steel and austenitic stainless steel |
15/05/1998 |
ISO 2342, ISO2342 |
Slotted headless screws with shank |
08/01/2004 |
ISO 23429, ISO23429 |
Gauging of hexagon sockets |
22/01/2004 |
ISO 2360, ISO2360 |
Non-conductive coatings on non-magnetic electrically conductive basis materials. Measurement of coating thickness. Amplitude-se |
09/12/2003 |
ISO 2361, ISO2361 |
Electrodeposited nickel coatings on magnetic and non-magnetic substrates. Measurement of coating thickness. Magnetic method |
31/01/1984 |
ISO 23631, ISO23631 |
Water quality. Determination of dalapon, trichloroacetic acid and selected haloacetic acids. Method using gas chromatography (G |
31/03/2006 |
ISO 23953-1, ISO23953-1 |
Refrigerated display cabinets. Vocabulary |
18/11/2005 |
ISO 23953-2, ISO23953-2 |
Refrigerated display cabinets. Classification, requirements and test conditions |
18/11/2005 |
ISO 2398, ISO2398 |
Rubber hose, textile-reinforced, for compressed air. Specification |
15/05/1996 |
ISO 24034, ISO24034 |
Welding consumables. Solid wires and rods for fusion welding of titanium and titanium alloys. Classification |
12/01/2006 |
ISO 2409, ISO2409 |
Paints and varnishes. Cross-cut test |
15/12/1992 |
ISO 2411, ISO2411 |
Rubber or plastics-coated fabrics. Determination of coating adhesion |
15/07/2000 |
ISO 2417, ISO2417 |
Leather. Physical and mechanical tests. Determination of the static absorption of water |
10/01/2003 |
ISO 2418, ISO2418 |
Leather. Chemical, physical and mechanical and fastness tests. Sampling location |
15/01/2003 |
ISO 2419, ISO2419 |
Leather. Physical and mechanical tests. Sample preparation and conditioning |
10/02/2006 |
ISO 2420, ISO2420 |
Leather. Physical and mechanical tests. Determination of apparent density |
16/01/2003 |
ISO 24234, ISO24234 |
Dentistry. Mercury and alloys for dental amalgam |
27/10/2004 |
ISO 24276, ISO24276 |
Foodstuffs. Methods of analysis for the detection of genetically modified organisms and derived products. General requirements |
06/03/2006 |
ISO 2431, ISO2431 |
Paints and varnishes. Determination of flow time by use of flow cups |
15/11/1996 |
ISO 2439, ISO2439 |
Flexible cellular polymeric materials. Determination of hardness (indentation technique) |
23/08/2001 |
ISO 2440, ISO2440 |
Flexible and rigid cellular polymeric materials. Accelerated ageing tests |
15/11/2000 |
ISO 24450, ISO24450 |
Laboratory glassware. Wide-necked boiling flasks |
23/01/2006 |
ISO 2450, ISO2450 |
Cream. Determination of fat content (Reference method) |
15/11/1999 |
ISO 2495, ISO2495 |
Specification for iron blue pigments |
15/11/1995 |
ISO 2503, ISO2503 |
Gas welding equipment. Pressure regulators for gas cylinders used in welding, cutting and allied processes up to 300 bar |
15/06/1998 |
ISO 2505, ISO2505 |
Thermoplastics pipes. Longitudinal reversion. Test methods and parameters |
05/12/2005 |
ISO 252-1, ISO252-1 |
Textile conveyor belts. Adhesive strength between constitutive elements. Methods of test |
15/09/1999 |
ISO 2535, ISO2535 |
Plastics. Unsaturated polyester resins. Measurement of gel time at ambient temperature |
22/11/2002 |
ISO 2538, ISO2538 |
Geometrical product specifications (GPS). Series of angles and slopes on prisms |
26/08/2004 |
ISO 2554, ISO2554 |
Plastics. Unsaturated polyester resins. Determination of hydroxyl value |
15/08/1997 |
ISO 2555, ISO2555 |
Plastics. Resins in the liquid state or as emulsions or dispersions. Determination of apparent viscosity by the Brookfield Test |
01/04/1992 |
ISO 2556, ISO2556 |
Plastics. Determination of the gas transmission rate of films and thin sheets under atmospheric pressure. Manometric method |
31/08/1979 |
ISO 2560, ISO2560 |
Welding consumables. Covered electrodes for manual metal arc welding of non-alloy and fine grain steels. Classification |
06/01/2006 |
ISO 2566-1, ISO2566-1 |
Steel. Conversion of elongation values. Carbon and low alloy steels |
15/09/1999 |
ISO 2566-2, ISO2566-2 |
Steel. Conversion of elongation values. Austenitic steels |
15/08/2001 |
ISO 2578, ISO2578 |
Plastics. Determination of the time-temperature limits after prolonged exposure to heat |
15/12/1993 |
ISO 2580-1, ISO2580-1 |
Plastics. Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials. Designation system and basis for specificatio |
22/10/2002 |
ISO 2580-2, ISO2580-2 |
Plastics. Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials. Preparation of test specimens and determinati |
08/01/2004 |
ISO 2589, ISO2589 |
Leather. Physical and mechanical tests. Determination of thickness |
16/01/2003 |
ISO 2592, ISO2592 |
Determination of flash and fire points. Cleveland open cup method |
19/11/2001 |
ISO 2624, ISO2624 |
Copper and copper alloys. Estimation of average grain size |
15/09/1995 |
ISO 2626, ISO2626 |
Copper. Hydrogen embrittlement test |
15/09/1995 |
ISO 2639, ISO2639 |
Steels. Determination and verification of the depth of carburized and hardened cases |
27/11/2002 |
ISO 266, ISO266 |
Acoustics. Preferred frequencies |
15/11/1997 |
ISO 2702, ISO2702 |
Heat-treated steel tapping screws. Mechanical properties |
15/09/1992 |
ISO 2719, ISO2719 |
Determination of flash point. Pensky-Martens closed cup method |
10/12/2002 |
ISO 2738, ISO2738 |
Sintered metal materials, excluding hardmetals. Permeable sintered metal materials. Determination of density, oil content and o |
15/01/2000 |
ISO 2739, ISO2739 |
Sintered metal bushes. Determination of radial crushing strength |
15/06/1998 |
ISO 2740, ISO2740 |
Sintered metal materials, excluding hardmetals. Tensile test pieces |
15/08/2000 |
ISO 2758, ISO2758 |
Paper. Determination of bursting strength |
15/01/2002 |
ISO 2759, ISO2759 |
Board. Determination of bursting strength |
11/01/2002 |
ISO 2789, ISO2789 |
Information and documentation. International library statistics |
21/03/2003 |
ISO 2806, ISO2806 |
Industrial automation systems. Numerical control of machines. Vocabulary |
15/02/1995 |
ISO 2808, ISO2808 |
Paints and varnishes. Determination of film thickness |
15/12/1997 |
ISO 2810, ISO2810 |
Paints and varnishes. Natural weathering of coatings. Exposure and assessment |
23/07/2004 |
ISO 2811-1, ISO2811-1 |
Paints and varnishes. Determination of density. Pyknometer method |
15/04/1998 |
ISO 2811-2, ISO2811-2 |
Paints and varnishes. Determination of density. Immersed body (plummet) method |
15/04/1998 |
ISO 2811-3, ISO2811-3 |
Paints and varnishes. Determination of density. Oscillation method |
15/04/1998 |
ISO 2811-4, ISO2811-4 |
Paints and varnishes. Determination of density. Pressure cup method |
15/04/1998 |
ISO 2812-1, ISO2812-1 |
Paints and varnishes. Determination of resistance to liquids. General methods |
15/05/1993 |
ISO 2812-2, ISO2812-2 |
Paints and varnishes. Determination of resistance to liquids. Water immersion method |
15/05/1993 |
ISO 2813, ISO2813 |
Paints and varnishes. Measurement of specular gloss of non-metallic paint films at 20$0D, 60$0D and 85$0D |
15/06/1997 |
ISO 2815, ISO2815 |
Paints and varnishes. Buchholz indentation test |
20/08/2003 |
ISO 2818, ISO2818 |
Plastics. Preparation of test specimens by machining |
15/07/1996 |
ISO 2819, ISO2819 |
Metallic coatings on metallic substrates. Electrodeposited and chemically deposited coatings. Review of methods available for t |
31/12/1980 |
ISO 283-1, ISO283-1 |
Textile conveyor belts. Full thickness tensile testing. Determination of tensile strength, elongation at break and elongation a |
15/12/2000 |
