ISO Norms and Standards
ISO, BSI, EN and Others





ISO STANDARDS: ISO 284, ISO284 -

Standard
Title
Date
ISO 284, ISO284
Conveyor belts. Electrical conductivity. Specification and test method
13/08/2003
ISO 2860, ISO2860
Earth-moving machinery. Minimum access dimensions
15/08/1992
ISO 2867, ISO2867
Earth-moving machinery. Access systems
15/03/1999
ISO 2870, ISO2870
Surface active agents. Detergents. Determination of anionic-active matter hydrolyzable and non-hydrolyzable under acid conditio
15/11/1994
ISO 2871-1, ISO2871-1
High molecular mass cationic-active matter
15/11/1994
ISO 2871-2, ISO2871-2
Surface active agents. Detergents. Determination of cationic-active matter content. Cationic-active matter of low molecular mas
15/11/1994
ISO 2873, ISO2873
Packaging. Complete, filled transport packages and unit loads. Low pressure test
25/04/2003
ISO 2875, ISO2875
Packaging. Complete, filled transport packages and unit loads. Water-spray test
18/11/2002
ISO 2897-1, ISO2897-1
Plastics. Impact-resistant polystyrene (PS-I) moulding and extrusion materials. Designation system and basis for specifications
15/09/1997
ISO 2897-2, ISO2897-2
Plastics. Impact-resistant polystyrene (PS-I) moulding and extrusion materials. Preparation of test specimens and determination
24/01/2004
ISO 2898-1, ISO2898-1
Plastics. Plasticized poly (vinyl chloride) (PVC-P) moulding and extrusion materials. Designation system and basis for specific
15/12/1996
ISO 2898-2, ISO2898-2
Plastics. Plasticized poly (vinyl chloride) (PVC-P) moulding and extrusion materials. Preparation of test specimens and determi
15/09/1997
ISO 291, ISO291
Plastics. Standard atmospheres for conditioning and testing
23/01/2006
ISO 2922, ISO2922
Acoustics. Measurement of airborne sound emitted by vessels on inland waterways and harbours
15/07/2001
ISO 293, ISO293
Plastics. Compression moulding of test specimens of thermoplastic materials
10/01/2006
ISO 294-1, ISO294-1
Plastics. Injection moulding of test specimens of thermoplastic materials. General principles, and moulding of multipurpose and
15/05/1997
ISO 294-2, ISO294-2
Plastics. Injection moulding of test specimens of thermoplastic materials. Small tensile bars
15/05/1997
ISO 294-3, ISO294-3
Plastics. Injection moulding of test specimens of thermoplastic materials. Small plates
07/08/2003
ISO 294-4, ISO294-4
Plastics. Injection moulding of test specimens of thermoplastic materials. Determination of moulding shrinkage
28/02/2003
ISO 295, ISO295
Plastics. Compression moulding of test specimens of thermosetting materials
25/02/2004
ISO 3001, ISO3001
Plastics. Epoxy compounds. Determination of epoxy equivalent
15/05/1999
ISO 3037, ISO3037
Corrugated fibreboard. Determination of edgewise crush resistance (unwaxed edge method)
15/03/1995
ISO 305, ISO305
Plastics. Determination of thermal stability of poly (vinyl chloride) related chlorine-containing homopolymers and copolymers a
15/09/1999
ISO 3059, ISO3059
Non-destructive testing. Penetrant testing and magnetic particle testing. Viewing conditions
16/11/2001
ISO 306, ISO306
Plastics. Thermoplastic materials. Determination of Vicat softening temperature (VST)
05/10/2004
ISO 307, ISO307
Plastics. Polyamides. Determination of viscosity number
01/09/2003
ISO 3071, ISO3071
Textiles. Determination of pH of aqueous extract
31/03/2006
ISO 308, ISO308
Plastics. Phenolic moulding materials. Determination of acetone-soluble matter (apparent resin content of material in the unmou
15/01/1998
ISO 3095, ISO3095
Railway applications. Acoustics. Measurement of noise emitted by railbound vehicles
31/01/2006
ISO 3098-0, ISO3098-0
Technical product documentation. Lettering. General requirements
15/05/1998
ISO 3098-2, ISO3098-2
Technical product documentation. Lettering. Latin alphabet, numerals and marks
15/08/2000
ISO 3098-3, ISO3098-3
Technical product documentation. Lettering. Greek alphabet
15/08/2000
ISO 3098-4, ISO3098-4
Technical product documentation. Lettering. Diacritical and particular marks for the Latin alphabet
15/08/2000
ISO 3098-5, ISO3098-5
Technical product documentation. Lettering. CAD lettering of the Latin alphabet, numerals and marks
15/04/1998
ISO 3098-6, ISO3098-6
Technical product documentation. Lettering. Cyrillic alphabet
15/08/2000
ISO 3104, ISO3104
Methods of test for petroleum and its products. Petroleum products. Transparent and opaque liquids. Determination of kinematic
15/07/1996
ISO 3107, ISO3107
Dentistry. Zinc oxide/eugenol and zinc oxide/non-eugenol cements
13/10/2004
ISO 3146, ISO3146
Plastics. Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary t
15/09/2000
ISO 3164, ISO3164
Earth-moving machinery. Laboratory evaluations of protective structures. Specifications for deflection-limiting volume
15/10/2000
ISO 3166-1, ISO3166-1
Codes for the representation of names of countries and their subdivisions. Country codes
15/02/1998
ISO 3167, ISO3167
Plastics. Multipurpose test specimens
06/08/2003
ISO 3170, ISO3170
Methods of test for petroleum and its products. BS 2000-475: Petroleum liquids. Manual sampling
25/02/2004
ISO 3171, ISO3171
Methods of test for petroleum and its products. BS 2000-476: Petroleum liquids. Automatic pipeline sampling
15/07/1999
ISO 3175-1, ISO3175-1
Textiles. Dry cleaning and finishing. Method for assessing the cleanability of textiles and garments
15/11/1998
ISO 3175-2, ISO3175-2
Textiles. Dry cleaning and finishing. Procedures for tetrachloroethene
15/11/1998
ISO 3175-3, ISO3175-3
Textiles. Dry cleaning and finishing. Procedure for testing performance when cleaning and finishing using hydrocarbon solvent
21/11/2003
ISO 3175-4, ISO3175-4
Textiles. Dry cleaning and finishing. Procedure for testing performance when cleaning and finishing using simulated wetcleaning
21/11/2003
ISO 3188, ISO3188
Starches and derived products. Determination of nitrogen content by the Kjeldahl method. Titrimetric method
15/11/1994
ISO 3219, ISO3219
Plastics. Polymers/resins in the liquid state or as emulsions or dispersions. Determination of viscosity using a rotational vis
15/03/1994
ISO 3231, ISO3231
Paints and varnishes. Determination of resistance to humid atmospheres containing sulfur dioxide
15/05/1993
ISO 3248, ISO3248
Paints and varnishes. Determination of the effect of heat
15/07/1998
ISO 3251, ISO3251
Paints, varnishes and plastics. Determination of non-volatile-matter content
01/08/2003
ISO 3252, ISO3252
Powder metallurgy. Vocabulary
15/12/2000
ISO 3262-1, ISO3262-1
Extenders for paints. Specifications and methods of test. Introduction and general test methods
15/09/1998
ISO 3262-10, ISO3262-10
Extenders for paints. Specifications and methods of test. Natural talc/chlorite in lamellar form
15/08/2000
ISO 3262-11, ISO3262-11
Extenders for paints. Specifications and methods of test. Natural talc, in lamellar form, containing carbonates
15/08/2000
ISO 3262-12, ISO3262-12
Extenders for paints. Specifications and methods of test. Muscovite-type mica
21/12/2001
ISO 3262-13, ISO3262-13
Extenders for paints. Specifications and methods of test. Natural quartz (ground)
15/09/1998
ISO 3262-14, ISO3262-14
Extenders for paints. Specifications and methods of test. Cristobalite
15/08/2000
ISO 3262-15, ISO3262-15
Extenders for paints. Specifications and methods of test. Vitreous silica
15/08/2000
ISO 3262-16, ISO3262-16
Extenders for paints. Specifications and methods of test. Aluminium hydroxides
15/08/2000
ISO 3262-17, ISO3262-17
Extenders for paints. Specifications and methods of test. Precipitated calcium silicate
15/08/2000
ISO 3262-18, ISO3262-18
Extenders for paints. Specifications and methods of test. Precipitated sodium aluminium silicate
15/08/2000
ISO 3262-19, ISO3262-19
Extenders for paints. Specifications and methods of test. Precipitated silica
15/08/2000
ISO 3262-2, ISO3262-2
Extenders for paints. Specifications and methods of test. Barytes (natural barium sulfate)
15/09/1998
ISO 3262-20, ISO3262-20
Extenders for paints. Specifications and methods of test. Fumed silica
15/08/2000
ISO 3262-21, ISO3262-21
Extenders for paints. Specifications and methods of test. Silica sand (unground natural quartz)
15/08/2000
ISO 3262-22, ISO3262-22
Extenders for paints. Specifications and methods of test. Flux-calcined kieselguhr
21/12/2001
ISO 3262-3, ISO3262-3
Extenders for paints. Specifications and methods of test. Blanc fixe
15/10/1998
ISO 3262-4, ISO3262-4
Extenders for paints. Specifications and methods of test. Whiting
15/09/1998
ISO 3262-5, ISO3262-5
Extenders for paints. Specifications and methods of test. Natural crystalline calcium carbonate
15/09/1998
ISO 3262-6, ISO3262-6
Extenders for paints. Specifications and methods of test. Precipitated calcium carbonate
15/10/1998
ISO 3262-7, ISO3262-7
Extenders for paints. Specifications and methods of test. Dolomite
15/10/1998
ISO 3262-8, ISO3262-8
Extenders for paints. Specifications and methods of test. Natural clay
15/02/2000
ISO 3262-9, ISO3262-9
Extenders for paints. Specifications and methods of test. Calcined clay
15/09/1998
ISO 3269, ISO3269
Fasteners. Acceptance inspection
15/08/2001
ISO 3274, ISO3274
Geometric product specifications (GPS). Surface texture. Profile method. Nominal characteristics of contact (stylus) instrument
15/05/1997
ISO 3325, ISO3325
Sintered metal materials, excluding hardmetals. Determination of transverse rupture strength
15/09/1999
ISO 3344, ISO3344
Reinforcement products. Determination of moisture content
15/07/1997
ISO 3376, ISO3376
Leather. Physical and mechanical tests. Determination of tensile strength and percentage extension
30/04/2003


To obtain a direct quote for any standard, including delivery,

CLICK HERE

 

 

OBTAIN A QUOTE
To obtain a quote for any standard, including delivery,

CLICK HERE